24V power-over-ethernet

POE power adapter without control circuit 24V1.5A, 24V1A, 48V0.7A models are available Low cost CE, FCC, UL certiicate

Model		24V 1.5A PoE (without control function)
DC Output(O/P)	DC voltage (three way)	24V
	Rated current	1.5A
	Current range	0~1.5A
	Ripple & Noise (max)	240mVp-p
	Rated power	36W
	Voltage tolerance	±4.0%
	Setup, rising time	500ms, 50ms at full load
	Hold up time	>5ms at full load
Input(I/P)	Rated Voltage range	100~240VAC
	Frequency range	47~63Hz
	Efficiency	>80% (min)
	AC current	0.75A(max)
	Leakage current	< 0,25 mA at 250 V
	Inrush current	< 40 A at 230 V
Protection	Short circuit type	Hiccup mode , but can't damage for permanent short circiut.
	Over load type	115~200% rated output power and Hiccup model, no damage, automatic recover after removing over load condition
	Over power type	115~200% rated output power and Hiccup model, no damage, automatic recover after removing over load condition
Environment	Working temp	0 ~+40°C
	Working humidity	20 ~90% RH non-condensing
	Storage temp & humidity	-20~+85°C, 10~95% RH
	Vibration	EN 61131-2
Safty & EMC	Standards	design refer to EN60950
	Withstand voltage	I/P-O/P: 1.5KVAC, 5mA, 60S
	Isolation resistance	I/P-O/P: 100M ohms/500VDC
	EMC	EN55022 Class B
Others	Certification	Compliant with CE, FCC
	MTBF	300 Khrs, Mil-HDBK-217F(25°C)
	Connection	3 pin AC plug; RJ45 connectors.   4/5 (+), 7/8(-);
	PCB dimension	115*50*33mm (L*W*H)
	Weight	165g
	Mounting	Desktop type
	RoHS compliance	Yes
	Warranty Period	2 year
Note:	1. All parameters NOT specially mentioned are measured at 230VAC input and rated load and 25°C of ambient temperature.
	2. Ripple & Noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

24V power-over-ethernet